Product Category

Filter Cartridge

Sintered metal filter elements engineered for precise, reliable filtration of liquids and gases. Pore sizes from 0.22 µm to 5,000 µm, operating continuously at temperatures up to 400 °C.

Get a Quote Download Datasheet

0.22–5,000 µmFiltration range

≤ 400 °COperating temp

5 TypesAvailable

ASTM F316Pore test on request

Filter Element Product Range

Choose the right filter element type for your application requirements

316L Stainless Steel

SS Sintered Powder Filter Element

High-strength sintered 316L SS powder filter element with a precise, uniform pore structure. Fully backwashable and regenerable — designed for demanding liquid and gas filtration.

Pore size: 0.22 – 100 µm
Operating temp: ≤ 400 °C
Max pressure: ≈ 0.6 MPa (wall-dependent)
Custom OD / length available

View Details

Pure Titanium

Ti Sintered Powder Filter Element

Sintered pure titanium powder filter offering outstanding resistance to HCl, H₂SO₄, seawater, and oxidising media. Preferred choice for PEM electrolysis and pharmaceutical processes.

Pore size: 0.22 – 100 µm
Resistant to HCl, H₂SO₄, seawater
PEM / PEMWE porous transport layer
Material-compatible for selected duties

View Details

316L SS · 5-Layer Sintered

SS Sintered Mesh Filter Element

Five-layer sintered wire mesh filter element. Consistent pore rating, high flow rate per unit area, and excellent mechanical strength for hydraulic, food, and petrochemical service.

Filtration rating: 1 – 5,000 µm (nominal)
5-layer sintered construction
High flow rate, low pressure drop
Cleanable & reusable

View Details

316L SS · Pleated

SS Pleated Mesh Filter Element

Pleated sintered mesh provides 3–5× the effective filtration area of a flat element in the same housing — superior dirt-holding capacity and extended service intervals.

Filtration rating: 1 – 1,000 µm (nominal)
Pleated for maximum filtration area
Low pressure drop
High dirt-holding capacity

View Details

316L SS Fiber Felt · Pleated

SS Pleated Felt Filter Element

Sintered SS fiber felt with pleated geometry for depth filtration. High void volume minimises pressure drop in polymer melts, catalyst recovery, and high-viscosity fluid applications.

Filtration rating: 3 – 150 µm (depth)
Depth filtration (fiber felt)
Handles high-viscosity fluids
High void volume & low ΔP

View Details

Why Choose FILTURE Filter Elements

Every element is manufactured and tested in our ISO-certified Baoji facility

Consistent Pore Rating

Sintered construction delivers consistent pore size — no bypass, no media migration under pressure or thermal cycling.

High Temperature

All-metal construction rated to 400 °C — suitable for steam, hot gases, solvent vapours, and thermal processes.

Backwashable

Fully regenerable by backwash, ultrasonic cleaning, or chemical soak — dramatically lower total cost of ownership.

Pore Testing

Bubble point test data and material certificates available on request for all filter elements.

Filter Cartridge