Sintered Metal Filter Cartridges & Elements
Sintered metal filter elements engineered for precise, reliable filtration of liquids and gases. Pore sizes from 0.22 µm (sintered powder) to 5,000 µm (sintered mesh) depending on product type; operating temperature limits depend on alloy, element structure, and seal materials.
Sintered Metal Filter Cartridge Product Range
Choose the right filter element type for your application requirements
SS Sintered Powder Filter Element
High-strength sintered 316L SS powder filter element with a precise, uniform pore structure. Fully backwashable and regenerable — designed for demanding liquid and gas filtration.
- Pore size: 0.22 – 100 µm
- Operating temp: ≤ 400 °C
- Max pressure: ≈ 0.6 MPa (wall-dependent)
- Custom OD / length available
Ti Sintered Powder Filter Element
Grade 2 titanium powder, pressed and vacuum-sintered into a porous filter element. Confirm chemical compatibility for the actual fluid, concentration, temperature and operating conditions before ordering.
- Pore size: 0.22 – 100 µm
- Compatibility review required
- PEM / PEMWE porous transport layer
- Material-compatible for selected duties
SS Sintered Mesh Filter Element
Multi-layer sintered wire mesh filter element. Consistent pore rating, high flow rate per unit area, and excellent mechanical strength for hydraulic, food, and petrochemical service.
- Filtration rating: 1 – 5,000 µm
- Multi-layer sintered construction
- High flow rate, low pressure drop
- Cleanable & reusable
SS Pleated Mesh Filter Element
Pleated sintered mesh provides more effective filtration area in the same housing (typically 3–5× a flat element, depending on pleat depth) — superior dirt-holding capacity and extended service intervals.
- Filtration rating: 1 – 1,000 µm
- Pleated for maximum filtration area
- Low pressure drop
- High dirt-holding capacity
SS Pleated Felt Filter Element
Sintered SS fiber felt with pleated geometry for depth filtration. High void volume minimises pressure drop in polymer melts, catalyst recovery, and high-viscosity fluid applications.
- Filtration rating: 3 – 150 µm (depth)
- Depth filtration (fiber felt)
- Handles high-viscosity fluids
- High void volume & low ΔP
Why Choose FILTURE Sintered Metal Filter Elements
Every element is manufactured and tested under ISO-certified quality processes in Baoji
Consistent Pore Rating
Sintered construction delivers consistent pore size — no bypass, no media migration under pressure or thermal cycling.
High Temperature
All-metal construction, up to 400 °C (element; alloy and seal dependent) — suitable for steam, hot gases, solvent vapours, and thermal processes.
Backwashable
Fully regenerable by backwash, ultrasonic cleaning, or chemical soak — dramatically lower total cost of ownership.
Custom Configurations
Non-standard pore ratings, OEM dimensions, and application-specific end connections — produced to your drawings or sample.
Sintered Metal Filter Cartridge Applications by Industry
Trusted in demanding industrial environments across 30+ countries
Need a Custom Sintered Metal Filter Element?
Our engineers will specify the right pore size, material, and end-cap configuration for your process. Fast turnaround, competitive pricing.