13 product lines in SS 316L and pure titanium, with pore ratings from 0.22 µm (sintered powder) to 5,000 µm (sintered mesh) depending on product type, and operating limits that depend on alloy, structure, and service conditions. Standard and fully custom configurations.
High-strength powder-sintered SS filter with uniform pore structure. Fully backwashable, up to 400 °C (element; seal dependent).
Good resistance to HCl, H₂SO₄, and seawater in many service conditions — commonly specified for PEM electrolysis and corrosive process filtration.
Multi-layer sintered wire mesh for a consistent filtration rating. High flow rate, low pressure drop, fully cleanable and reusable.
Pleated construction delivers more effective filtration area in the same housing footprint (typically 3–5× a flat element, depending on pleat depth) — extended service intervals, high dirt-holding capacity.
Sintered SS fiber felt with pleated geometry for depth filtration. High void volume minimises pressure drop in polymer and high-viscosity fluid service.
Sintered cylindrical porous tubes for in-line gas sparging, aeration, and cross-flow filtration. Custom OD and length to fit existing housings.
Flat sintered plates for gas distribution, membrane backing, and diffusion applications. Uniform pore distribution, custom thickness and dimensions.
Circular sintered discs for flow control, pressure relief, and fluidisation. Available in multiple diameters with precise pore size tolerance.
Plain, twill, and Dutch-weave wire mesh in SS (304/316L/310S) and titanium (Grade 1/2). Aperture 0.003–11 mm, mesh count 2–400 per inch, supplied in sheets or rolls.
Pure titanium perforated sheet in round, square, and hexagonal patterns. Corrosion-resistant and lightweight — ideal for electrolyzer frames and marine applications.
Sintered titanium fiber felt for porous transport layers in PEM and PEMWE electrolyzers. Precise porosity control, high electrical conductivity, stable in typical electrolysis chemical environments.
CNC-machined titanium components to customer drawings and specifications. Flanges, end-caps, housings, brackets — tight-tolerance machining with full material traceability.
Grade 5 titanium performance fasteners for motorcycle, automotive, and bicycle builds — flange bolts, lock nuts, washers, banjo bolts, and stud kits. Raw or color anodized, wholesale and OEM supply.
Non-standard pore sizes, alloy combinations, and tight-tolerance dimensions are part of our normal workload. Send us your process parameters and we'll quote the right configuration.
