SS 304/316L/310S · Ti Gr.1/2

SS / Ti Wire Mesh

Woven wire mesh and 5-layer sintered panels in stainless steel (304/316L/310S) or titanium (Grade 1/2). Plain, twill, plain Dutch, and twilled Dutch weave constructions; aperture 0.003–11 mm, mesh count 2–400 per inch.

0.003–11 mmAperture range

2–400Mesh count (per inch)

SS & TiMaterial options

CustomSheet size to order

Expanded metal mesh diamond pattern close-up

Mesh & Sheet

SS / Ti Wire Mesh

Woven wire mesh in plain, twill, plain Dutch, and twilled Dutch weave constructions, supplied as raw woven sheet or as five-layer sintered panels (the same base material used in sintered mesh filter elements). Available in stainless steel (302, 304, 304L, 304H, 316, 316L, 309, 310S) and titanium (Grade 1 or Grade 2; Grade 5 on request).

Material

SS 302/304/304L/316/316L/310S or Ti Grade 1/2

Aperture

0.003 – 11 mm

Mesh count

2 – 400 per inch

Wire diameter

0.02 – 1.5 mm

Weave types

Plain, twill, plain Dutch, twilled Dutch

Form

Woven sheet, cut blanks, or 5-layer sintered panel

Request a Quote Downloads

Mesh count 2–400 per inch; wire diameter 0.02–1.5 mm; aperture 0.003–11 mm. Plain and twill weave sheets cover general screening and protection from 10 to 400 mesh. Plain Dutch weave (MPW series) and twilled Dutch weave (MXW series) give a defined filtration precision in the warp direction, from 315 µm down to 3 µm, for process filtration and catalyst support. Sheets are supplied to customer-specified dimensions — standard roll widths up to 2000 mm (selvage edge) or 8000 mm (raw edge) for stainless steel, and up to 2000 mm for titanium, with cut-to-size blanks available.

Five-layer sintered panels are produced using the same sintering process as the filter element media — multiple woven layers are stacked and bonded by high-temperature sintering into a single rigid sheet that cannot delaminate under pressure or temperature cycling. These panels are suitable as filter media blanks for disc and flat filter applications.

Woven titanium mesh is also supplied as an electrode substrate for electrolysis and fuel cell applications, with platinum, iridium, ruthenium, or silver plating available for MMO (mixed metal oxide) coated electrodes.

Technical Specifications

SS / Ti Wire Mesh — Full Specification

Properties & Performance

Material

SS 302/304/304L/316/316L/310S; Ti Gr.1/2

Aperture range

0.003 – 11 mm

Mesh count

2 – 400 per inch

Wire diameter

0.02 – 1.5 mm

Weave

Plain / twill / Dutch weave (plain & twilled)

Filtration precision

3 – 315 µm (Dutch weave, warp direction)

Max temp

SS 316L 600 °C · Ti 300 °C continuous

Dimensions & Configuration

Sheet widths

SS 20–2000 mm (selvage) / up to 8000 mm (raw edge); Ti 8–2000 mm

Cut-to-size

Yes — blanks, discs, custom shapes

Sintered panels

5-layer, rigid, no adhesive

Material certs

MTR and CoC for all grades

Non-std alloys

Monel, Hastelloy, Inconel on request

Electrode mesh

Ti mesh with Pt / Ir / Ru / Ag plating for MMO electrodes

Surface finish

As-woven; bright-annealed SS on request

Product Features

Why Engineers Specify This Wire Mesh

Wide Aperture Range

0.003 mm (3 µm, fine Dutch weave) to 11 mm (coarse plain weave) — one product family covers most industrial screening and filtration mesh requirements.

SS and Ti Material Range

SS 302/304/304L/316/316L/309/310S for corrosion and temperature resistance; Ti Grade 1/2 for chloride and acid environments, Grade 5 on request for higher-strength applications. Mill test certificates for all grades.

5-Layer Sintered Panels Available

Same construction as sintered mesh filter element media — multiple woven layers sintered together for a rigid, delamination-free panel.

Cut-to-Size and Custom Shapes

Discs, blanks, and custom profiles cut by waterjet or laser. Tight-tolerance cuts available for filter housings and reactor components.

Dutch Weave — Defined Filtration Precision

Plain Dutch weave (MPW series) and twilled Dutch weave (MXW series) give a defined filtration precision from 315 µm down to 3 µm in the warp direction — suitable for applications requiring a precise upper particle size cut.

Mill Test Certificates

Chemical composition, mechanical properties, and mesh specification certificates available for all material grades and mesh counts.

Applications

Where This Wire Mesh Gets Used

Industrial Screening

Coarse to medium mesh for dry and wet screening of minerals, aggregates, food products, and chemical powders.

0.1–10 mm aperture · SS or Ti · Woven

Catalyst Support Media

Fine Dutch-weave mesh as support layer for fixed-bed catalysts in chemical and petrochemical reactors — holds catalyst while allowing flow.

3–315 µm · SS 316L / 310S · Rigid

Pharmaceutical Screen Filter

Woven SS discs in tablet coating drums and pharmaceutical processing equipment — precise aperture, CIP-compatible.

0.05–0.5 mm · 316L · Clean service

Marine and Subsea Use

Ti mesh for seawater intake screens and offshore filtration — resists seawater chloride corrosion that pits SS in prolonged immersion.

0.1–5 mm · Ti Grade 2 · Seawater

Petrochemical Guard Mesh

Coarse protective mesh upstream of pressure vessels, heat exchangers, and control valves in refinery service.

1–10 mm · SS 316L / 310S

Multi-Layer Filter Media Blanks

5-layer sintered panels as filter media blanks for disc and leaf filtration equipment requiring a rigid, consistently-rated medium.

2–200 µm · Sintered · No adhesive

Electrolyzer and Fuel Cell Electrode Mesh

Woven titanium mesh substrate for PEM electrolyzer and fuel cell electrodes, supplied with platinum, iridium, ruthenium, or silver plating for MMO-coated electrode applications.

Ti Gr.1/2 · Pt/Ir/Ru/Ag plated · Electrode mesh

SS / Ti Wire Mesh

SS / Ti Wire Mesh

SS / Ti Wire Mesh — Full Specification